Eppendorf Reference Manuel d'utilisateur télécharger pdf (Page 28)

50 – 250 μL ( Fig. 5)

Push the control button all the way down and pull off the

ejector sleeve (13).

Piston seal (4)

– Unscrew pipette at the central junction.

– Discard piston seal (4). Insert new piston seal into the

clamp (3) and place both into the lower part (5).

Ejector seal (10)

– Unscrew lower part of the pipette.

– Discard seal (10) with O-ring.

– Insert new seal (see "Inserting the seals").

Tighten the tip cone (see IV of this part).

The tip cone (11) is also available complete with seal.

Eppendorf Reference® – Part B – Maintenance

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Pas de commentaire

Eppendorf Reference Manuel d'utilisateur Page 28