Eppendorf UVette Manuel d'utilisateur télécharger pdf (Page 5)

Eppendorf® UVette® — Instructions for use

3 Safety

3.1 Intended use

The Eppendorf UVette is a UV-transparent plastic cuvette for single use. It is used for

photometric analysis of liquids in the UV range and the entire VIS range. The Eppendorf

UVette is used in training, routine and research laboratories, and in the life sciences,

industry, and chemistry.

In-vivo applications (in or on the human body) are not permitted.

The device may only be operated by skilled personnel who have been trained in the

areas mentioned above.

3.2 Warnings for intended use

4 Operation

4.1 Inserting the cuvette

Prerequisites

• The cuvette does not have any scratches or contamination due to dust or

fingerprints.

• There is an adequate measuring volume in the cuvette. Ensure that the minimum

measuring volume has been reached.

• The measuring solution is of from particles and bubbles.

WARNING!

WARNING! Damage to health from infectious liquids and pathogenic

germs.

 When handling infectious liquids and pathogenic germs, observe the

national regulations, the biological security level of your laboratory, the

material safety data sheets, and the manufacturer's application notes.

 Wear personal protective equipment.

 Comprehensive regulations on handling germs or biological material in

risk group II or higher can be found in the "Laboratory Biosafety Manual"

(source: World Health Organization, Laboratory Biosafety Manual, in the

currently valid version).

NOTICE!

NOTICE! Material damage due to improper handling

The cuvette may fall if it is not handled properly. Liquid may spray out.

 Store the cuvette in a cuvette stand.

Hint!

• Do not touch the optical surfaces in the lower part of the UVette.

• Do not touch the corners of the cuvette (protective gloves may become

damaged).

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Eppendorf UVette Manuel d'utilisateur Page 5