Eppendorf Combitips advanced Manuel d'utilisateur télécharger pdf (Page 15)

Operation

Combitips advanced

English (EN)

4.3 Inserting the Combitip

4.4 Dispense liquid

Additional information can be found in the operating manual of your dispenser.

NOTICE! Device damage due to incorrect handling of the inserted Combitip

 Insert the Combitip straight into the dispenser from below.

 Do not rotate the inserted Combitip.

 Never grip the dispenser using the Combitip.

The Combitip is easier to insert if the ejector is held pressed down during insertion.

1. If the Combitip piston has been pushed out, push

it back into the cylinder of the Combitip.

2. Use force to push the Combitip into the opening

on the lower side of the dispenser until the

Combitip engages .

The liquid dispensing angle should always be as steep as possible. A dispensing angle greater

than 45° can result in an incorrect dispensing volume during the final dispensing steps.

1 2

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 28 29

Pas de commentaire

Eppendorf Combitips advanced Manuel d'utilisateur Page 15